Precautions for installation and use of cable waterproof joints
Time:
2021-08-13 13:13
Source:
Cable waterproof joints can be applied to environments with water to provide safe and reliable connector joints. The most important thing is that they can achieve waterproof effects. So what should be paid attention to during installation and use of cable waterproof joints?
1. Choose suitable joint materials according to the type and specifications of the cable joints. Nowadays, the quality of cable joint materials is also uneven. However, in order to ensure the quality of the cable joints, it is recommended not to be cheap, and it is best to choose the materials of the reliable cable joint manufacturers.
2. It is best not to choose rainy days when cable joints, because water in the cable will seriously affect the service life of the cable, and even short-circuit accidents may occur in serious cases.
3. Be sure to read the manufacturer’s product manual carefully before making cable waterproof connectors. This is particularly important for cables of 10kV and above. Think about all the processes before doing it.
For terminal joints of single-core armored cables above 4 and 10kV, remember that only one end of the steel belt can be grounded.
5. Do not use too much force when pressing the copper pipe, as long as it is crimped in place, the copper end face after crimping is bound to have many raised points, this must be flattened with a file, and no burrs should be left.
6. When using the blowtorch with the heat shrinkable cable joint, pay attention to the torch moving back and forth, and not just keep the blowtorch in one direction.
7. The size of the cold-shrinkable cable joint must be strictly in accordance with the drawing instructions, especially when pulling out the support in the reserved tube, be more careful.
Related news
Graphene-Coated Woven Tape: A Flexible Shielding Material Solution for Silicone Data Cables
As high-speed data transmission, flexible electronics, and silicone cable applications continue to develop, data-cable materials must balance flexibility, structural protection, wrapping processability, and electromagnetic compatibility. Graphene Coating Woven Tape is a cable shielding and wrapping material designed for silicone data cables. By combining a woven substrate with a graphene coating, it provides an option for cable covering, separation, and shielding structures in flexible data-cable designs.
A Flexible Shielding Option for Indian Electronics and Industrial Customers
Aramid Yarn and LCP Fiber: Technical Solutions for Optical-Cable Reinforcement and Advanced Materials
DONGGUAN, China — Dongguan Tino Electronic Material Co., Ltd. has supplied Polypropylene Foam Tape to customers in Pakistan, supporting cable manufacturing, material procurement, and industrial protection applications.
As communication speeds continue to increase, data cables, coaxial cables, control cables, and industrial cables face growing requirements for signal integrity and electromagnetic compatibility. Copper Foil Mylar, also known as copper foil polyester tape, is a cable shielding material made by laminating copper foil with polyester (PET/Mylar) film. It combines the conductivity of copper with the mechanical support, insulation, and dimensional stability of polyester film, providing a thin, flexible, and process-friendly shielding material for modern cable manufacturing.
PP Foam Tape: A Lightweight Material Solution for Cushioning, Isolation, and Cable Wrapping
As communication equipment, electronic assemblies, and cable systems continue to move toward lighter and more compact designs, wrapping materials must do more than provide basic separation and protection. They also need to support continuous processing, bending, and consistent assembly. PP foam tape, based on a polypropylene foam layer, uses the material’s lightweight, flexible, and cushioning characteristics to support cable wrapping, electronic component protection, and selected industrial packaging applications.
Hotline
Contact
Phone: +86 136-9494-5590
Email: world@dilo-china.com
Address: Room 201, building A no.7 building xiaotangindustrial zone qihang village dongkeng town dongguan city, China. 523455
Scan and Follow
Scan and Follow
Online Message