Papua New Guinea Aramid Yarn
Category:
Papua New GuineaCable wrapping and filling materials
Product Description
Quick Overview
- High-performance aramid yarn designed for strength and reinforcement applications.
- Two selected grades: Ordinary Type and High Modulus Type .
- High-modulus type for optical cables; standard type for others.
- Ordinary Type provides a balanced combination of tensile performance, elongation and initial modulus.
- High Modulus Type is designed for higher modulus requirements, with an initial modulus of 122 ± 10 GPa and chord modulus of ≥95 GPa.
- Suitable for cable reinforcement and other applications requiring lightweight, high-strength fiber performance.
- Performance values shown below are transcribed from the supplied product parameter image; final orders should follow the approved technical data sheet.
Product Introduction
Aramid yarn is a high-strength fiber material used where low weight, tensile reinforcement and dimensional support are required. In cable-related applications, it can be selected as a reinforcement component according to the required tensile performance, modulus and processing conditions.
This page focuses only on the two requested grades: Ordinary Type and High Modulus Type .
Performance Parameters
Performance Item | Unit | Ordinary Type | High Modulus Type |
Linear density | dtex | 220/330/440/660/933/1110/1670/3160 | 1110/1580/3160/6320/8050/9480 |
Tensile Strength | cN/dtex | ≥19.0 | ≥19.0 |
Tensile Strength | g/d | ≥21.5 | ≥21.5 |
Tensile Strength CV | % | ≤5.0 | ≤5.0 |
Elongation at Break | % | 3.5 ± 1.0 | 2.5 ± 1.0 |
Initial Modulus | GPa | 90 ± 20 | 122 ± 10 |
Initial Modulus | cN/dtex | 625 ± 139 | 764 ± 69 |
Chord Modulus | GPa | — | ≥95 |
Oil Content | % | M ± 0.5 | M ± 0.5 |
Moisture Content | % | 5.0 ± 2.0 | 3.0 ± 1.0 |
Density | cm³ | 1.44 | 1.44 |
Volume Resistivity | Ω | 10⁹ | 10⁹ |
Hot-Air Shrinkage at 190°C for 15 min | % | ≤0.2 | ≤0.2 |
Thermal Decomposition Temperature | °C | >530 | >530 |
Limiting Oxygen Index | % | ≥29 | ≥29 |
High-modulus type for optical cables; standard type for others.
Why Choose the Right Aramid Grade?
- Match tensile strength with the reinforcement load required by the final product.
- Use initial modulus as a key selection factor when stiffness and dimensional support are important.
- Consider elongation at break when the material must accommodate movement or process tension.
- Use the high-modulus grade when the design requires higher initial modulus and chord modulus.
- Use Ordinary Type when a balanced ordinary-grade performance profile is preferred.
Product Benefits
High-strength reinforcement
The listed tensile-strength values of ≥19.0 cN/dtex and ≥21.5 g/d support reinforcement-oriented material selection, subject to the final product design and test method.
Modulus options for different designs
Ordinary Type is listed at 90 ± 20 GPa initial modulus, while High Modulus Type is listed at 122 ± 10 GPa. The High Modulus Type grade also lists a chord modulus of ≥95 GPa.
Typical Applications
- Optical-fiber cable reinforcement.
- Telecommunication cable reinforcement.
- Power cable reinforcement.
- High-strength protective yarn structures.
- Composite reinforcement applications requiring high tensile performance.
packaging
Packaged in cartons; each roll is individually bagged with spacing and secured in place.
Request Aramid Yarn Information
Contact Tino Materials for grade selection, technical data, sample evaluation and quotation support for Ordinary Type and High Modulus Type .
Our company has domestic and DuPont bulletproof yarns of various specifications. Welcome to inquire.
My Wechat:TINO-Tina or 13694945590
WhatsApp:+86 13694945590
Email:world@dilo-china.com

