Papua New Guinea Aramid Yarn

Aramid Yarn for High-Strength Cable Reinforcement,Ordinary Type and High Modulus Type ,High-modulus type for optical cables; standard type for others.

Category:

Papua New GuineaCable wrapping and filling materials

Product Description

Quick Overview

  • High-performance aramid yarn designed for strength and reinforcement applications.
  • Two selected grades: Ordinary Type  and High Modulus Type .
  • High-modulus type for optical cables; standard type for others.
  • Ordinary Type provides a balanced combination of tensile performance, elongation and initial modulus.
  • High Modulus Type is designed for higher modulus requirements, with an initial modulus of 122 ± 10 GPa and chord modulus of ≥95 GPa.
  • Suitable for cable reinforcement and other applications requiring lightweight, high-strength fiber performance.
  • Performance values shown below are transcribed from the supplied product parameter image; final orders should follow the approved technical data sheet.

Product Introduction

    Aramid yarn is a high-strength fiber material used where low weight, tensile reinforcement and dimensional support are required. In cable-related applications, it can be selected as a reinforcement component according to the required tensile performance, modulus and processing conditions.

    This page focuses only on the two requested grades: Ordinary Type  and High Modulus Type . 
Performance Parameters

Performance Item

Unit

Ordinary Type 

High Modulus Type 

Linear density

dtex

220/330/440/660/933/1110/1670/3160

1110/1580/3160/6320/8050/9480

Tensile Strength

cN/dtex

≥19.0

≥19.0

Tensile Strength

g/d

≥21.5

≥21.5

Tensile Strength CV

%

≤5.0

≤5.0

Elongation at Break

%

3.5 ± 1.0

2.5 ± 1.0

Initial Modulus

GPa

90 ± 20

122 ± 10

Initial Modulus

cN/dtex

625 ± 139

764 ± 69

Chord Modulus

GPa

—

≥95

Oil Content

%

M ± 0.5

M ± 0.5

Moisture Content

%

5.0 ± 2.0

3.0 ± 1.0

Density

cm³

1.44

1.44

Volume Resistivity

Ω

10⁹

10⁹

Hot-Air Shrinkage at 190°C for 15 min

%

≤0.2

≤0.2

Thermal Decomposition Temperature

°C

>530

>530

Limiting Oxygen Index

%

≥29

≥29

High-modulus type for optical cables; standard type for others.

Why Choose the Right Aramid Grade?

  • Match tensile strength with the reinforcement load required by the final product.
  • Use initial modulus as a key selection factor when stiffness and dimensional support are important.
  • Consider elongation at break when the material must accommodate movement or process tension.
  • Use the high-modulus grade when the design requires higher initial modulus and chord modulus.
  • Use Ordinary Type  when a balanced ordinary-grade performance profile is preferred.

Product Benefits

High-strength reinforcement

The listed tensile-strength values of ≥19.0 cN/dtex and ≥21.5 g/d support reinforcement-oriented material selection, subject to the final product design and test method.

Modulus options for different designs

Ordinary Type is listed at 90 ± 20 GPa initial modulus, while High Modulus Type is listed at 122 ± 10 GPa. The High Modulus Type grade also lists a chord modulus of ≥95 GPa.

Typical Applications

  • Optical-fiber cable reinforcement.
  • Telecommunication cable reinforcement.
  • Power cable reinforcement.
  • High-strength protective yarn structures.
  • Composite reinforcement applications requiring high tensile performance. 

packaging

Packaged in cartons; each roll is individually bagged with spacing and secured in place.

 

 

Request Aramid Yarn Information

    Contact Tino  Materials for grade selection, technical data, sample evaluation and quotation support for Ordinary Type  and High Modulus Type . 
     Our company has domestic and DuPont bulletproof yarns of various specifications. Welcome to inquire.

My Wechat:TINO-Tina or 13694945590
WhatsApp:+86 13694945590
Email:world@dilo-china.com